Evolution3 Series- BenchTop

The Keencut Evolution3™ BenchTop is perfect for a busy studio or medium use production environment.

• Evolution3 is guaranteed to cut within .008″ of a straight line for the length of the cut
• The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately
• Site line strip enables operators to see exactly where the cut line is
• The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut
• Anti-sag system holds the cutter bar level for accurate line-up

Turn Your Precision Cutting Bar into a Cutting System
Designed to fit your existing table or with the optional M-Bench System. Combine the M-Bench with the Evolution3™ BenchTop cutter to create the ultimate precision cutting table.

Perfect for Cutting Up to 1/2″:

• Includes:
  • Double Graphik tool head
  • Graphik utility blades (100)
• Accurate to within .008”
• Single handed positioning, cutting and clamping
• Two-way cutting with two individual blade holders or arrange for progressive cutting
• Lift-and-Hover holds the sight-line strip just above the media along its whole length to give precision alignment
• QuikSwap Tool Heads attach or detach from the track in seconds
• Site line strip enables operators to see exactly where the cut line is
• 5 year general warranty

The BenchTop Bench provides the strong and solid foundation required for precise accurate cutting. The unique patented Proteus construction method creates a secure and rigid workbench that will not lose any stability over time. Strength and stability are vital to ensure that you achieve optimum clamping and repeatable, reliable cutting across the full length of the cutter bar. The Proteus construction is easy to assemble, and the internal fittings are concealed for a flush finish and maximum safety under heavy load.

The BenchTop Bench is supplied without a worktop, giving you the freedom to choose your own. You can use any suitable sheet material for the worktop, including glass. You can use standard 1.22m (4′) wide boards to form the worktop, or 1.525m (5′) wide boards if you fit the cantilever extension. Worktop dimensions are shown in the table below. We recommend that worktops should be at least 18mm (3/4″) thick to provide a stable surface for cutting.